Description
There are three modes of plastic double syringe pump: Rate mode,Time mode and Weight mode. It is designed with pressure that will be automatically released after alarm of occlusion. Histories can be recorded.

Features
1. Three levels of alarm volume
2. Three levels of occlusion pressure
3. IP*4 design to prevent splash
4. Unique colour LCD
5. Identify the specifications of syringe automatically
6. RS232 interface
7. AC power and battery
8. Stand-by power,auto-switch,auto recharged.

Specification of Plastic Double Syringe Pump

Compatible Syringe	Any standard syringe with 10ml,20ml(30ml) and 50ml(60ml)
Accuracy	±2% ( Any manufacturers of syringes, right after calibration )
Flow range (Rate mode)
50ml(60ml)	0.1ml/h to 1800.0ml/h (0.1ml/h step)
20ml(30ml)	0.1ml/h to 800.0ml/h (0.1ml/h step)
10ml	0.1ml/h to 400.0ml/h (0.1ml/h step)
Time Mode Range
Volume	0.1 to 999.9ml (0.1ml step)
TIME	1 to 1999min (1min step)
Body Weight Mode Range
Volume	0.1 to 999.9ml (0.1ml step)
DRUG MASS	0.1 to 999.9mg (0.1mg step)
DOSE	0.01 to 99.99ug/kg/min (0.01ug/kg/min step)
WEIGHT	0.1 to 300kg (0.1kg the least step)
Volume Limit Range	0 to 1999.9ml (0.1 ml step)
Total Volume Range	0.1 to 1999.9ml (0.1 ml step)
Rapid injection	50ml(60ml): 1800.0ml/h, 20ml(30ml): 800.0ml/h, 10ml: 400.0ml/h
KVO Rate	1ml/h
Alarms	Near empty, Syringe empty, Volume complete(a volume limit has been set ), Occlusion,Syringe loose, Operation error, Low battery and other device failures.
Power Supply:
AC power supply:	AC 100 to 240V±10%,50/60Hz
Internal LI Battery:	11.1V, 2000mAh. Approximmately 8 hours of continuous operation on a new and fully charged battery running at 5ml/h.
Power Consumption:	≤25VA
Safety level:	Class I, Type CF
Dimensions:	280mm(L)×160mm(W)×130mm(H)
Net Weight:	Approximately. 3.0kg
Operating Conditions:
Ambient temperature:	5 to 40°C
Relative humidity:	20 to 90%
Storage Condition:
Ambient temperature:	-10 to 55°C
Relative humidity:	10 to 90%
Accessories:	AC power line, Operational manual

Plastic Dual Injection Pump

Plastic Dual Syringe Pump

Plastic Dual Infusion Pump